project basis
dual-tone epoxy coating
2020
Floor coatings come in a variety of properties to meet the needs and purpose of the space. For example, anti-slip epoxy can be applied to factory floors so that there is more grip between one's shoes and the floor. Or, metallic epoxy can be applied not just to floors but also to furniture if one wishes to incorporate aesthetic effects to one's home.
​
Because floor coatings can be manufactured to achieve and meet the diverse requirements of different spaces, there is a wide array of possibilities available to you when it comes to applying floor coatings to your premises.
Self-levelling epoxy
Self-levelling epoxies leave a smooth finish and hides surface imperfections.
​
Because of the smooth surface finish, they are easier to clean too and thus often used for food and pharmaceutical manufacturing settings where it is mandatory to adhere to rigorous cleanliness standards.
​
Self-levelling epoxies, after given adequate time to cure and harden, are also more resistant to wear and tear because of their thick coatings. However, bear in mind that the thicker coating (usually a minimum thickness of 1.5 to 2mm) means having to use significantly more product for every metre square. Thus, the product consumption of self-levelling epoxies are high.
Roller applied epoxy
Roller applied epoxies leave a rougher texture (also referred to as the orange peel effect because it looks like the skin of an orange).
​
Unlike self-levelling epoxy, roller-applied epoxies does not get you a smooth surface. However, it does create an anti-slip texture. The epoxy can also be mixed with anti-slip quartz to strengthen the anti-slip properties, especially for oil and chemical industries.
​
The product consumption rate is also lower, meaning the overall material cost of roller-applied epoxy is less than the overall material cost of self-levelling epoxy.
​
Finally, roller applied epoxies are easier to apply and, if defects occur, easier to fix too. Generally, the method of rectification is to reapply a thin coat of epoxy over the affected area. Hence, the rectification costs are lower too.
Metallic epoxy
Many tend to think that epoxy is for the industrial areas. While not wrong, there are epoxies that can produce beautiful, aesthetic effects too. Such are called metallic epoxy.
​
The typical process of applying metallic epoxy involves cleaning up the floor to rid any dirt and grease. A self-levelling screed compound may be applied if deemed necessary and depending on how uneven the floor is. Once the self-levelling compound cures and hardens, the primer will be applied, followed by the metallic epoxy. This is a stage of creativity and artistry. Finally, it is sealed with a top coat.
The final finish of metallic epoxies can imitate the patterns of those like natural marble, which adds a touch of luxurious beautification to your home.
Inspiration + Function
Example 01
A married couple with young children consulted us that they were concerned about their young children slipping and falling in the toilet.
​
Instead of tiles, which could be slippery when wet, we recommended anti-slip epoxy to the couple. They were a little skeptical at first because they thought epoxy was for industrial use. In fact, epoxy can be used for the home if so desired and if it also happens to match your interior design concept. Moreover, it comes in almost 200 different colours. After some thought, the couple decided to give it a go, and easily found the colour of their choice to match the existing fittings and equipment of their washroom.
​
After application of the epoxy, the couple was relieved and had a peace of mind knowing that their children are less likely to slip and fall while at the same time keeping the washroom looking presentable.